AN10 Hose End 45 Degree Swivel for Steel/Nylon Braided Hose BLACK/SILVER RUSSELL

Quantity:

close

Code: RUS-613115

Price: $29.99

Shipping Weight: 0.19 pounds

1 available for immediate delivery

Quantity in Basket: None

New Russell hose end. This is an AN10 hose end which only fits on AN10 hose, fitting is an aluminum swivel, 45 degree fitting. These are compatible with Russell steel/nylon braided hose (ProFlex, ProRace, ProClassic, ProClassic II), or equivalent (without teflon liner). Hose not included. Fittings are sold individually.

TECH TIP : This fitting assembled by un-threading the nut from the fitting assembly, then pushing the threaded nut over the AN hose, and then rotating the hose end fitting into the hose/nut end until it is fully threaded/seated with assembly lube. Assembling these hoses takes time and may be difficult for beginners. Having an aluminum vise and aluminum wrenches will make your assembly easier and prevent damage to the fittings. AN fittings only work withAN hose, they do not work with common SAE/Metric rubber/silicone hoses, only AN hoses.

AN Equivalent ID" Sizes :

AN3 = Roughly 3/16"

AN4 = Roughly 1/4"

AN6 = Roughly 3/8"

AN8 = Roughly 1/2"

AN10 = Roughly 5/8"

AN12 = Roughly 3/4"

AN16 = Roughly 1"

AN20 = Roughly 1 1/4"